---
title: "Declaratively Deploying Multiple Blog Versions with NixOS and Flakes"
date: 2021-10-23T18:01:31-07:00
draft: true
tags: ["Hugo", "Nix"]
---

### Prologue

You can skip this section if you'd like.

For the last few days, I've been stuck inside of my room due to some kind of cold or flu, which
or
{{< sidenote "right" "pcr-note" "may or may not be COVID™." >}}
The results of the PCR test are pending at the time of writing.
{{< /sidenote >}}
In seeming correspondence with the progression of my cold, a thought occurred in the back of my mind:
"_Your blog deployment is kind of a mess_". On the first day, when I felt only a small tingling in
my throat, I waved that thought away pretty easily. On the second day, feeling unwell and staying
in bed, I couldn't help but start to look up Nix documentation. And finally, on the third day,
between coughing fits and overconsumption of oral analgesic, I got to work.

In short, this post is the closest thing I've written to a fever dream.

### The Constraints

I run several versions of this site. The first is, of course, the "production" version, hosted
at the time of writing on `danilafe.com` and containing the articles that I would like to share
with the world. The second is a version of this site on which drafts are displayed - this
way, I can share posts with my friends before they are published, get feedback, and even just
re-read what I wrote from any device that has an internet connection. The third is the Russian
version of my blog. It's rather empty, because translation is hard work, so it only exists
so far as another "draft" website.

My build process (a derivative of what I describe in [rendering mathematics on the back end]({{< relref "./backend_math_rendering.md" >}})) is also fairly unconventional. When I developed this site, the best
form of server-side mathematics rendering was handled by KaTeX, and required some additional
work to get rolling (specifically, I needed to write code to replace sections of LaTeX on
a page with their HTML and MathML versions). There may be a better way now, but I haven't yet
performed any kind of migration. 

Currently, only my main site is behind HTTPS. However, I would like for it to be possible to
adjust this, and possibly even switch my hosts without changing any of the code that actually
builds my blog.

### Why Flakes
This article is about using Nix Flakes to manage my configuration. But what is it that made
me use flakes? Well, two things:

* __Adding custom packages__. The Nix code for my blog provides a package / derivation for each
  version of my website, and I want to use these packages in my `configuration.nix` so that
  I can point various Nginx virtual hosts to each of them. This is typically done using
  overlays; however, how should my system configuration get my overlay Nix expression? I would
  like to be able to separate my build-the-blog code from my describe-the-server code, and
  so I need a clean way to let my system access the former from the latter.
  flakes solve this issue my letting me specify a blog flake, and pull it in as one
  of the inputs.
* __Versioning__. My process for deploying new versions of the site prior to flakes boiled down to fethcing
  the latest commit from the `master` branch of my blog repository, and updating the `default.nix`
  file with that commit. This way, I could reliably fetch the version of my site that
  I want published. Flakes do the same thing: the `flake.lock` file
  contains the hashes of the Git-based dependencies of a flake, and thus prevents builds from
  accidentally pulling in something else. However, unlike my approach, which relies on custom
  scripts and extra tools such as `jq`, the locking mechanism used by flakes is provided with
  standard Nix tooling. Using Flakes also guarantees that my build process won't break with
  updates to Hugo or Ruby, since the `nixpkgs` version is stored in `flake.lock`, too.

### The Final Result
Here's the relevant section of my configuration:

{{< codelines "Nix" "server-config/configuration.nix" 42 59 >}}

I really like how this turned out for three reasons. First,
it's very clear from the configuration what I want from my server:
three virtual hosts, one with HTTPS, one with drafts, and one with drafts and
_in Russian_. Second, there's plenty of code reuse. I'm using two builder functions,
`english` and `russian`, but under the hood, the exact same code is being
used to run Hugo and all the necessary post-processing. Finally, all of this can be
used pretty much immediately given my blog flake, which reduces the amount of glue
code I have to write.

### Getting There
#### A Derivation Builder
As I mentioned earlier, I need to generate multiple versions of my blog. All of these
use pretty much the same build process -- run Hugo on the Markdown files, then do some
post-processing (in particular, convert the LaTeX in the resulting pages into MathML
and nice-looking HTML). I didn't want to write this logic multiple times, so I settled
for a function that takes some settings, and returns a derivation:

{{< codelines "Nix" "blog-static-flake/lib.nix" 6 21 >}}

There are a few things here:

* On line 7, the settings `src`, `ssl`, and `host` are inherited into the derivation.
  The `src` setting provides a handle on the source code of the blog. I haven't had
  much time to test and fine-tune the changes enabling multi-language support on the site,
  so they reside on a separate branch. It's up to the caller to provide which version of the
  source code should be used for building. The `host` and `ssl` settings are interesting
  because __they don't actually matter for the derivation itself__ -- they just aren't used
  in the builder. However, attributes given to a derivation are accessible from "outside",
  and these settings will play a role later.
* Lines 10 through 14 deal with setting the base URL of the site. Hugo, my static site generator,
  does not know how to interpret
  the `--baseURL` option when a blog has multiple languages. What this means is that in the end,
  it is impossible to configure the base URL used in links from the command line,
  and I need to apply some manual changes to the configuration file. I need to be able to adjust
  the base URL becasue each version of my website is hosted in a different place: the default (english)
  website is hosted on `danilafe.com`, the version with drafts on `drafts.danilafe.com`, and so on.
  However, the configuration file only knows one base URL per language, and so it _doesn't_ know
  when or when not to use the `drafts.` prefix. The `urlSub` variable is used in the builder.
* On line 15, the `publicPath` variable is set; while single-language Hugo puts all the generated
  HTML into the `public` folder, the multi-language configuration places them into `public/[language-code]`.
  Thus, depending on the configuration, the builer needs to look in a different place for final output.

This new `website` function is general enough to represent all my blog versions, but it's too low-level.
Do I really want to specify the `publicPath` each time I want to describe a version of the site?
What about `settings.replaceUrl`, or the source code? Just like I would in any garden variety language,
I defined two helper functions:

{{< codelines "Nix" "blog-static-flake/lib.nix" 25 46 >}}

Both of these simply make a call to the `website` function (and thus return derivations), but they
make some decisions for the caller, and provide a nicer interface by allowing attributes to be omitted.
Specifically, by default, a site version is assumed to be HTTP-only, and to contain non-draft articles.
Furthermore, since each function corresponds to a language, there's no need for the caller to provide
a blog version, and thus also the output `path`, or even to specify the "from" part of `replaceUrl`.
The `wrapHost` function, not included in the snippet, simply adds `http` or `https` to the `host`
parameter, which does not otherwise include this information. These functions can now be called
to describe different versions of my site:

```Nix
# Default version, hosted on the main site and using HTTPS
english {
    ssl = true;
    host = "danilafe.com";
}

# English draft version, hosted on draft domain and not using HTTPS.
english {
    drafts = true;
    host = "drafts.danilafe.com";
}

# Russian draft version, hosted on draft (russian) domain, and not using HTTPS.
russian {
    drafts = true;
    host = "drafts.ru.danilafe.com";
}
```

#### Configuring Nginx
The above functions are already a pretty big win (in my opinion) when it comes to
describing my blog. However, by themselves, they aren't quite enough to clean
up my system configuration: for each of these blog versions, I'd need to add
an Nginx `virtualHosts` entry where I'd pass in the corresponding host (like `danilafe.com` or
`drafts.danilafe.com`), configure SSL, and so on. At one point, too, all paths
in `/var` were by default mounted as read-only by NixOS, which meant that it was necessay
to tell `systemd` that `/var/www/challenges` should be writeable so that the SSL
certificate for the site could be properly renewed. Overall, this was a lot of detail
that I didn't want front-and-center in my server configuration.

However, with the additional "ghost" attributes, my derivations already contain most
of the information required to configure Nginx. The virtual host, for instance,
is the same as `replaceUrl.to` (since I'd want the Nginx virtual host for a blog
version to handle links within that version). The `ssl` ghost parameter corresponds
precisely to whether or not a virtual host will need SSL (and thus ACME, and thus
the `systemd` setting). 

To make this _really_ nice, I wanted all of this to be "just another section of my
configuration file". That is, I wanted to control my site deployment via regular
old attributes in `configuration.nix`. To this end, I needed a module. Xe recently
[wrote about NixOS modules in flakes](https://christine.website/blog/nix-flakes-3-2022-04-07),
and what I do here is very similar. In essence, a module has two bits:

* The _options_, which specify what kind of attributes this module understands.
  The most common option is `enable`, which tells a module that it should apply
  its configuration changes.
* The _configuration_, which consists of the various system settings that this module
  will itself set. These typically depend on the options.

In short, a module describes the sort of options it will accept, and then provides
a way to convert these newly-described options into changes to the system configuration.
It may help if I showed you the concrete options that my newly-created blog module provides:

{{< codelines "Nix" "blog-static-flake/module.nix" 32 43 >}}

There are three options here:
* `enable`, a boolean-valued input that determines whether or not
the module should make any changes to the system configuration at all.
* `sites`, which, as written in the code, accepts a list of derivations.
  These derivations correspond to the various versions of my site that should
  be served to the outside world.
* `challengePath`, a string to configure where ACME will place files during
  automatic SSL renewal.

Now, while these are the only three options the user will need to set, the changes
to the system configuration are quite involved. For instance, for each site (derivation)
in the `sites` list, the resulting configuration needs to have a `virtualHost` in
the `services.nginx` namespace. To this end, I defined a function that accepts
a site derivation and produces the necessary settings:

{{< codelines "Nix" "blog-static-flake/module.nix" 7 19 >}}

Each virtual host always has a `root` option (where Nginx should look for HTML files),
but only those sites for which SSL is enabled need to specify `addSSL`, `enableACME`,
and `acmeRoot`. All the virtual hosts are assembled into a single array (below,
`cfg` refers to the options that the user provided to the module, as specified above).

{{< codelines "Nix" "blog-static-flake/module.nix" 28 28 >}}

If the `enable` option is set, we enable Nginx, and provide it with a list of all of the
virtual hosts we generated. Below, `config` (not to be confused with `cfg`) is the
namespace for the module's configuration.

{{< codelines "Nix" "blog-static-flake/module.nix" 45 51 >}}

In a similar manner to this, I generate a list of `systemd` services which are used
to configure the challenge path to be writeable. Click the `module.nix` link above
to check out the full file.

#### Creating a Flake
{{< todo >}} This needs to be done {{< /todo >}}

#### Using the Module

{{< codelines "Nix" "server-config/configuration.nix" 42 59 >}}