collar/libraries/AltSoftSerial/examples/ShowConfiguration/ShowConfiguration.ino

98 lines
2.3 KiB
Arduino
Raw Normal View History

2020-05-15 05:30:37 -07:00
#include <AltSoftSerial.h>
// AltSoftSerial show configuration example
// Will print library configuration to default serial port
// Open your serial monitor to see config for your board
// Printout would repeat every 10sec (just in case you missed it somehow)
// Print Configuration
// -----------------------
// Direct include AltSoftSerial internals to obtaion PIN setup (you do not need this in regular code)
// This example code is in the public domain.
#include <config/AltSoftSerial_Boards.h>
void printAltSoftSerialSetup(Stream &port)
{
#define PRINT_PFX "AltSoftSerial:"
#define PRINT_PIN_NAME(pin,name) { char buffer[128+1]; sprintf(buffer, PRINT_PFX "PIN:%2d %s", (int)pin, (const char*)name); port.println(buffer); }
port.println(PRINT_PFX "Setup info: begin");
#if defined(ALTSS_USE_FTM0)
port.println(PRINT_PFX "USE FTM0");
#endif
#if defined(ALTSS_USE_TIMER1)
port.println(PRINT_PFX "USE TIMER1");
#endif
#if defined(ALTSS_USE_TIMER2)
port.println(PRINT_PFX "USE TIMER2");
#endif
#if defined(ALTSS_USE_TIMER3)
port.println(PRINT_PFX "USE TIMER3");
#endif
#if defined(ALTSS_USE_TIMER4)
port.println(PRINT_PFX "USE TIMER4");
#endif
#if defined(ALTSS_USE_TIMER5)
port.println(PRINT_PFX "USE TIMER5");
#endif
#if defined(INPUT_CAPTURE_PIN)
PRINT_PIN_NAME(INPUT_CAPTURE_PIN,"RX");
#endif
#if defined(OUTPUT_COMPARE_A_PIN)
PRINT_PIN_NAME(OUTPUT_COMPARE_A_PIN,"TX");
#endif
#if defined(OUTPUT_COMPARE_B_PIN)
PRINT_PIN_NAME(OUTPUT_COMPARE_B_PIN,"(unused PWM)");
#endif
#if defined(OUTPUT_COMPARE_C_PIN)
PRINT_PIN_NAME(OUTPUT_COMPARE_C_PIN,"(unused PWM)");
#endif
#if defined(OUTPUT_COMPARE_D_PIN)
PRINT_PIN_NAME(OUTPUT_COMPARE_D_PIN,"(unused PWM)");
#endif
#if defined(OUTPUT_COMPARE_E_PIN)
PRINT_PIN_NAME(OUTPUT_COMPARE_E_PIN,"(unused PWM)");
#endif
#if defined(OUTPUT_COMPARE_F_PIN)
PRINT_PIN_NAME(OUTPUT_COMPARE_F_PIN,"(unused PWM)");
#endif
port.println(PRINT_PFX "Setup info: end");
#undef PRINT_PIN_NAME
#undef PRINT_PFX
}
void setup()
{
// Open default serial to dump config to
Serial.begin(9600);
while (!Serial) ; // wait for serial monitor
printAltSoftSerialSetup(Serial);
}
void loop()
{
// Repeat every 10 sec (just in case)
delay(10000);
Serial.println("");
printAltSoftSerialSetup(Serial);
}