Update process script to generate TeX.

Lab2/lab2.tex

@@ -0,0 +1,66 @@
+\documentclass{article}
+\usepackage[margin=1in]{geometry}
+\usepackage{amsmath}
+\usepackage{graphicx}
+\begin{document}
+\section*{Lab 2}
+
+The data gathered in this lab is listed in tables
+1 and 2.
+
+\begin{figure}[h]
+    \centering
+    \begin{tabular}{lcccccc}
+        Node & $g_m$ (S) & $r_o$ ($\Omega$) & Gain & $I_\text{off} (A)$ & $I_\text{on} (A)$ & $I_\text{on}/I_\text{off}$ \\
+        \hline
+        longchannel pmos & 4.01E-04 & 1.36E+04 & 5.457 & 1.02E-11 & 1.36E-03 & 1.34E+08 \\
+        longchannel nmos & 9.13E-04 & 1.31E+04 & 11.95 & 1.12E-11 & 3.22E-03 & 2.87E+08 \\
+        50nm pmos & 2.11E-04 & 1.55E+04 & 3.259 & 8.84E-09 & 1.48E-04 & 1.68E+04 \\
+        50nm nmos & 4.44E-04 & 1.31E+04 & 5.793 & 3.64E-09 & 3.12E-04 & 8.55E+04 \\
+        16nmlp pmos & 1.62E-04 & 1.68E+04 & 2.72 & 2.30E-11 & 5.54E-05 & 2.40E+06 \\
+        16nmlp nmos & 2.88E-04 & 1.33E+04 & 3.83 & 8.87E-12 & 9.13E-05 & 1.03E+07 \\
+        16nmhp pmos & 3.33E-04 & 5.37E+03 & 1.787 & 9.22E-08 & 1.51E-04 & 1.64E+03 \\
+        16nmhp nmos & 4.95E-04 & 5.56E+03 & 2.755 & 7.41E-08 & 2.17E-04 & 2.93E+03 \\
+    \end{tabular}
+    \label{fig:dc}
+    \caption{Properties of various transistor sizes and types}
+\end{figure}
+
+\begin{figure}[h]
+    \centering
+    \begin{tabular}{lcccccc}
+        Node & Oscillation Period (ps) & Oscillation Frequency (GHz) \\
+        \hline
+        longchannel & 1020 & 0.980 \\
+        50nm & 222 & 4.49 \\
+        16nmlp & 140 & 7.11 \\
+        16nmhp & 32.2 & 31.0 \\
+    \end{tabular}
+    \label{fig:t}
+    \caption{Switching frequency of 5-long inverter loop.}
+\end{figure}
+
+From these tables, we can see that smaller transistors have progressively smaller
+gain, and progressively smaller ratios of on current $I_\text{on}$ and off current
+$I_\text{off}$. We can explain the drop in gain with velocity saturation. At smaller
+scales, short-channel effects make the relationship between current and gate voltage no longer
+quadratic, but linear (and thus smaller in magnitude). This means that the transconductance
+of a transistor decreases as it gets smaller, leading to lower gain. Furthermore,
+due to short-channel effects such as impact ionization, current doesn't stop increasing
+past the theoretical saturation point. This makes the transistor behave less like
+a current source past saturation, and decreases gain.
+
+Decreasing the size of the transistor does, however, significantly improve its timing characteristics.
+While at 1$\mu m$ the 5-transistor loop we simulated has an oscillation frequency of 0.98GHz, the 16nm
+high power loop can go as fast as 31GHz. This is likely due to the decreased capacitances at
+this scale: it takes less time to charge up any part of the CMOS logic, including the outputs,
+which makes it possible for subsequent transistors to respond faster, and so on.
+
+For analog circuits, we care about gain, since we want to ensure that our signal is transmitted
+properly through our circuit. Thus, bigger transistors are probably better suited for this application,
+since they have higher (sometimes much higher) gains than smaller transistors. On the other hand,
+from the digital side, the gain doesn't matter as much as the performance characteristics of the transistor,
+which makes the smaller nodes (ones that we measured to have higher oscillation frequency) preferable. 
+
+\end{document}
+

Lab2/process.py

@@ -27,8 +27,8 @@ simulations = {
 }
 
 moss = {
-  "nmos": "M1 2 1   0   0 nmos W={10*ll} L= ll",
+  "pmos": "M1 2 1 vdd vdd pmos W={10*ll} L={ll}",
-  "pmos": "M1 2 1 vdd vdd pmos W={10*ll} L={ll}"
+  "nmos": "M1 2 1   0   0 nmos W={10*ll} L= ll"
 }
 
 script_dc = """
@@ -96,16 +96,40 @@ def find_period(ident, script, model, mos, l):
         group2.append((dp, time[i]))
     peak1 = max(group1)[1] * 1000000000000
     peak2 = max(group2)[1] * 1000000000000
-    print(ident, peak2-peak1)
+    print(ident, peak2-peak1, 1/(peak2-peak1) * 1000)
+
+
+def find_table(ident, script, model, mos, l):
+    vds = l.get_data('vds')
+    current_lo = l.get_data('I(vds)', 0)
+    current_hi = l.get_data('I(vds)', l.case_count - 1)
+    if mos == "nmos":
+        vgs1 = l.get_data('I(vds)', l.case_count - 2)
+        vgs2 = l.get_data('I(vds)', l.case_count - 1)
+        gm = (vgs2[-1]-vgs1[-1])/(simulations[model][0]/12)
+        vds = l.get_data('vds', l.case_count - 1)
+        ids = l.get_data('I(vds)', l.case_count - 1)
+        ro = (vds[-5] - vds[-1])/(ids[-5] - ids[-1])
+        print("{} & {:.2E} & {:.2E} & {:.4} & {:.2E} & {:.2E} & {:.2E} \\\\".format(
+            ident[3:].replace("_", " "), -gm, -ro, gm * ro, -current_lo[-1], -current_hi[-1], current_hi[-1]/current_lo[-1]))
+    if mos == "pmos":
+        vgs1 = l.get_data('I(vds)', 0)
+        vgs2 = l.get_data('I(vds)', 1)
+        gm = (vgs2[0]-vgs1[0])/(simulations[model][0]/12)
+        vds = l.get_data('vds', 0)
+        ids = l.get_data('I(vds)', 0)
+        ro = (vds[50] - vds[0])/(ids[50] - ids[0])
+        print("{} & {:.2E} & {:.2E} & {:.4} & {:.2E} & {:.2E} & {:.2E} \\\\".format(
+            ident[3:].replace("_", " "), -gm, -ro, gm * ro, current_hi[0], current_lo[0], current_lo[0]/current_hi[0]))
 
 def find_onoff(ident, script, model, mos, l):
     vds = l.get_data('vds')
     current_lo = l.get_data('I(vds)', 0)
     current_hi = l.get_data('I(vds)', l.case_count - 1)
     if mos == "nmos":
-        print(ident, -current_lo[-1] * 1000, -current_hi[-1] * 1000, current_hi[-1]/current_lo[-1])
+        print("node: {}\toff: {:.2E}\ton: {:.2E}\tratio: {:.2E}".format(ident, -current_lo[-1], -current_hi[-1], current_hi[-1]/current_lo[-1]))
     if mos == "pmos":
-        print(ident, current_lo[0] * 1000, current_hi[0] * 1000, current_lo[0]/current_hi[0])
+       print("node: {}\toff: {:.2E}\ton: {:.2E}\tratio: {:.2E}".format(ident, current_hi[0], current_lo[0], current_lo[0]/current_hi[0]))
 
 def find_gm(ident, script, model, mos, l):
     vds = l.get_data('vds')
@@ -154,6 +178,10 @@ def run_sim(script, model, mos, callback, file_type = "dc"):
 
     callback(scriptname, script, model, mos, l)
 
+print(" --- LaTeX --- ")
+for node in simulations.keys():
+    for mos in moss.keys():
+        run_sim(script_dc, node, mos, find_table)
 
 print(" --- gm, ro --- ")
 for mos in moss.keys():
@@ -161,8 +189,8 @@ for mos in moss.keys():
         run_sim(script_dc, node, mos, find_gm)
 
 print(" --- onoff --- ")
-for mos in moss.keys():
+for node in simulations.keys():
-    for node in simulations.keys():
+    for mos in moss.keys():
         run_sim(script_dc, node, mos, find_onoff)
 
 print(" --- period --- ")