cleanup

.gitmodules

@@ -16,3 +16,6 @@
 [submodule "libraries/arduino-lmic"]
 	path = libraries/arduino-lmic
 	url = https://github.com/mcci-catena/arduino-lmic.git
+[submodule "libraries/arduino-base64"]
+	path = libraries/arduino-base64
+	url = https://github.com/adamvr/arduino-base64.git

Makefile

@@ -32,6 +32,7 @@ INC_DIRS?=-I./$(ARDUINO_DIR)/libraries/SPI/src\
 					-I./libraries/arduino-LoRa/src\
 					-I./libraries/TinyGPSPlus/src\
           -I./libraries/TinyLoRa\
+          -I./libraries/arduino-base64\
 					-I./$(NANOPB_DIR)\
 					-I./protobuf\
 					-I./$(ARDUINO_DIR)/libraries/SoftwareSerial/src/
@@ -57,6 +58,7 @@ SRC_FILES?=./$(ARDUINO_DIR)/cores/arduino/main.cpp\
 					 ./libraries/arduino-LoRa/src/LoRa.cpp\
 					 ./libraries/TinyGPSPlus/src/TinyGPS++.cpp\
            ./libraries/TinyLoRa/TinyLoRa.cpp\
+           ./libraries/arduino-base64/Base64.cpp\
 					 ./$(NANOPB_DIR)/pb_encode.c\
 					 ./$(NANOPB_DIR)/pb_decode.c\
 					 ./$(NANOPB_DIR)/pb_common.c\
@@ -96,6 +98,7 @@ run: flash
 
 start: flash
 	systemctl start lora-gateway-bridge loraserver
+
 stop:
 	avrdude -v -patmega328p -carduino -P/dev/ttyUSB0 -b115200 -D -Uflash:w:nothing.hex:i
 	systemctl stop lora-gateway-bridge loraserver

README.md

@@ -7,3 +7,21 @@
 # Python3 dependencies
 - protobuf
 - grpcio-tools
+
+# Setup
+
+On a clean clone one would most likely have to run 
+``` 
+git submodule update --recursive 
+```
+
+# Makefile Stuff
+
+The most helpful makefile recipies are start, stop, and run
+
+- start flashes the arduino and starts system services for lorawan
+
+- stop flashes a dummy program to the arduino and stops services for lorawan
+
+- run flashes the arduino and connects to uart using screen
+

collar.cpp

@@ -9,8 +9,11 @@
 //
 // Modified by Brent Rubell for Adafruit Industries, 2018
 /************************** Configuration ***********************************/
+#include <TinyGPS++.h>
+#include <SoftwareSerial.h>
 #include <TinyLoRa.h>
 #include <SPI.h>
+#include "Base64.h"
 #include "gateway/message.pb.h"
 
 #include "pb_common.h"
@@ -42,6 +45,8 @@ const unsigned int sendInterval = 60;
 
 // Pinout for Adafruit Feather 32u4 LoRa
 TinyLoRa lora = TinyLoRa(2, 10, 9);
+TinyGPSPlus gps;
+SoftwareSerial ss(6, 7);
 
 // Pinout for Adafruit Feather M0 LoRa
 //TinyLoRa lora = TinyLoRa(3, 8, 4);
@@ -140,14 +145,30 @@ void on_recieve(int n) {
 }
 void setup()
 {
-  delay(2000);
+  delay(1000);
+  // start  uart
   Serial.begin(9600);
+  // start software uart for GPS
+  ss.begin(4800);
   while (! Serial);
 
-  delay(4000);
+  delay(1000);
   // Initialize pin LED_BUILTIN as an output
   pinMode(LED_BUILTIN, OUTPUT);
 
+  // Initialize GPS - GPS does not work indoors - This will block until GPS available 
+  // Serial.println("Starting GPS");
+  // while(!gps.location.isValid()) {
+  //   while(ss.available()>0) {
+  //     gps.encode(ss.read());
+  //   }
+  //   if (millis() > 5000 && gps.charsProcessed() < 10)
+  //   {
+  //     Serial.println(F("No GPS detected: check wiring."));
+  //     while(true);
+  //   }
+  // }
+
   // Initialize LoRa
   Serial.print("Starting LoRa...");
   // define multi-channel sending
@@ -161,13 +182,6 @@ void setup()
     while(true);
   }
 
-  Fenceless_CollarResponse coord;
-  coord.loc.x = 0;
-  coord.loc.y = 0;
-
-  pb_ostream_t stream;
-  stream  = pb_ostream_from_buffer(loraData, sizeof(loraData));
-  int err = pb_encode(&stream, Fenceless_CollarResponse_fields, &coord);
   // Optional set transmit power. If not set default is +17 dBm.
   // Valid options are: -80, 1 to 17, 20 (dBm).
   // For safe operation in 20dBm: your antenna must be 3:1 VWSR or better
@@ -186,30 +200,55 @@ void setup()
   Serial.println("OK");
 }
 
+// TIMER1_OVF_vect is called once per second
 int sendCounter = 0;
 ISR(TIMER1_OVF_vect) {
   digitalWrite(LED_BUILTIN, sendCounter%2);
-  if(sendCounter==0) {
+  if(sendCounter==0 && gps.location.isValid()) {
+    Serial.println("Valid gps");
+
+    // reset send counter
     sendCounter = sendInterval;
 
+    Fenceless_CollarResponse coord;
+    coord.loc.x = gps.location.lat();
+    coord.loc.y = gps.location.lng();
+
+    pb_ostream_t stream;
+    stream  = pb_ostream_from_buffer(loraData, sizeof(loraData));
+    int err = pb_encode(&stream, Fenceless_CollarResponse_fields, &coord);
+
+    // Generate copy pasteable base64
+    // char base64[50];
+    // base64_encode(base64, (char*)loraData, stream.bytes_written);
+    // Serial.println(stream.bytes_written);
+    // Serial.println(base64);
+
     Serial.println("Sending LoRa Data...");
-    lora.sendData(loraData, sizeof(loraData), lora.frameCounter);
+    lora.sendData(loraData, stream.bytes_written, lora.frameCounter);
     // Optionally set the Frame Port (1 to 255)
     // uint8_t framePort = 1;
     // lora.sendData(loraData, sizeof(loraData), lora.frameCounter, framePort);
     Serial.print("Frame Counter: ");Serial.println(lora.frameCounter);
     lora.frameCounter++;
-
-    Serial.println("delaying...");
+  } 
+  else if (!gps.location.isValid()) {
+    Serial.println("waiting for gps");
+  } 
+  else {
+    Serial.println("delaying til next frame counter");
   } 
   sendCounter--;
 }
 void loop()
 {
-  if(recieved) {
-    Serial.println("Recieved something");
-  } else {
-    Serial.println("Nothing yet");
-  }
+  // For later when recieving from gateway is implemented
+  // if(recieved) {
+  //   Serial.println("Recieved something");
+  // } else {
+  //   Serial.println("Nothing yet");
+  // }
+  if(ss.available()>0)
+    gps.encode(ss.read());
   delay(1000);
 }