src/chalk/builtin.cr

@@ -4,8 +4,11 @@ module Chalk
     # that is provided by chalk's standard library, and therefore
     # has predefined output.
     abstract class BuiltinFunction
+      # Gets the number of parameters this function has.
+      getter param_count : Int32
+
       # Creates a new function with *param_count* parameters.
-      def initialize()
+      def initialize(@param_count)
       end
 
       # Uses the given `Compiler::Emitter` to output code.
@@ -19,8 +22,11 @@ module Chalk
     # function also accepts trees rather than register numbers,
     # and therefore can accept and manipulate trees.
     abstract class InlineFunction
+      # Gets the number of parameters this function has.
+      getter param_count : Int32
+
       # Creates a new function with *param_count* parameters.
-      def initialize()
+      def initialize(@param_count)
       end
 
       # Generates code like `Compiler::CodeGenerator` would.

src/chalk/codegen.cr

@@ -8,6 +8,11 @@ module Chalk
     class CodeGenerator
       include Emitter
 
+      # The register into which the return value of a function is stored.
+      RETURN_REG = 14
+      # The register into which the "stack pointer" is stored.
+      STACK_REG  = 13
+
       # Gets the instructions currently emitted by this code generator.
       getter instructions
 
@@ -37,7 +42,10 @@ module Chalk
       # `#generate!` call.
       def generate!(tree, function : Trees::TreeFunction | Builtin::BuiltinFunction, table, target, free)
         start_at = free
-        to_stack
+        # Move I to stack
+        setis
+        # Get to correct stack position
+        addi STACK_REG
         # Store variables
         store (start_at - 1) unless start_at == 0
         # Increment I and stack position
@@ -59,7 +67,10 @@ module Chalk
         # Reduce stack pointer
         load free, start_at
         opr TokenType::OpSub, STACK_REG, free
-        to_stack
+        # Move I to stack
+        setis
+        # Get to correct stack position
+        addi STACK_REG
         # Restore
         restore (start_at - 1) unless start_at == 0
         # Get call value into target
@@ -85,9 +96,12 @@ module Chalk
           generate! tree.right, table, free, free + 1
           opr tree.op, target, free
         when Trees::TreeCall
-          entry = table[tree.name]?.not_nil!
-          raise "Unknown function" unless entry.is_a?(FunctionEntry)
-          generate! tree, entry.function, table, target, free
+          entry = table[tree.name]?
+          raise "Unknown function" unless entry &&
+                                          entry.is_a?(FunctionEntry)
+          function = entry.function
+          raise "Invalid call" if tree.params.size != function.param_count
+          generate! tree, function, table, target, free
         when Trees::TreeBlock
           table = Table.new(table)
           tree.children.each do |child|

src/chalk/compiler.cr

@@ -53,11 +53,11 @@ module Chalk
         end
         @logger.debug("Done creating symbol table")
 
+        table["draw"] = FunctionEntry.new Builtin::InlineDrawFunction.new
         table["get_key"] = FunctionEntry.new Builtin::InlineAwaitKeyFunction.new
+        table["get_font"] = FunctionEntry.new Builtin::InlineGetFontFunction.new
         table["set_delay"] = FunctionEntry.new Builtin::InlineSetDelayFunction.new
         table["get_delay"] = FunctionEntry.new Builtin::InlineGetDelayFunction.new
-        table["set_sound"] = FunctionEntry.new Builtin::InlineSetSoundFunction.new
-        table["draw_number"] = FunctionEntry.new Builtin::InlineDrawNumberFunction.new
         return table
       end
 

src/chalk/emitter.cr

@@ -1,19 +1,8 @@
 module Chalk
   module Compiler
-    # The register into which the return value of a function is stored.
-    RETURN_REG = 14
-    # The register into which the "stack pointer" is stored.
-    STACK_REG  = 13
-
     # Module to emit instructions and store
     # them into an existing array.
     module Emitter
-      # Moves I to the next available value on the stack.
-      def to_stack
-        setis
-        addi STACK_REG
-      end
-
       # Emits an instruction to load a *value* into a register, *into*.
       def load(into, value)
         inst = Ir::LoadInstruction.new into, value.to_i32

src/chalk/inline.cr

@@ -3,8 +3,31 @@ require "./type"
 
 module Chalk
   module Builtin
+    # Inline function to draw sprite at address I.
+    class InlineDrawFunction < InlineFunction
+      def initialize
+        @param_count = 3
+      end
+
+      def generate!(emitter, params, table, target, free)
+        if !params[2].is_a?(Trees::TreeLit)
+          raise "Third parameter must be a constant."
+        end
+        emitter.generate! params[0], table, free, free + 1
+        emitter.generate! params[1], table, free + 1, free + 2
+        emitter.instructions << Ir::DrawInstruction.new free, free + 1, params[2].as(Trees::TreeLit).lit.to_i32
+      end
+      def type
+          return Compiler::FunctionType.new([Compiler::Type::U8] * 3, Compiler::Type::U0)
+      end
+    end
+
     # Inline function to await for a key and return it.
     class InlineAwaitKeyFunction < InlineFunction
+      def initialize
+        @param_count = 0
+      end
+
       def generate!(emitter, params, table, target, free)
         emitter.instructions << Ir::AwaitKeyInstruction.new target
       end
@@ -13,13 +36,31 @@ module Chalk
       end
     end
 
+    # Inline function to get font for a given value.
+    class InlineGetFontFunction < InlineFunction
+      def initialize
+        @param_count = 1
+      end
+
+      def generate!(emitter, params, table, target, free)
+        emitter.generate! params[0], table, free, free + 1
+        emitter.instructions << Ir::GetFontInstruction.new free
+      end
+      def type
+          return Compiler::FunctionType.new([Compiler::Type::U8], Compiler::Type::U0)
+      end
+    end
+
     # Inline function to set the delay timer.
     class InlineSetDelayFunction < InlineFunction
+      def initialize
+        @param_count = 1
+      end
+
       def generate!(emitter, params, table, target, free)
         emitter.generate! params[0], table, free, free + 1
         emitter.instructions << Ir::SetDelayTimerInstruction.new free
       end
-
       def type
           return Compiler::FunctionType.new([Compiler::Type::U8], Compiler::Type::U0)
       end
@@ -27,6 +68,10 @@ module Chalk
 
     # Inline function to get the delay timer.
     class InlineGetDelayFunction < InlineFunction
+      def initialize
+        @param_count = 0
+      end
+
       def generate!(emitter, params, table, target, free)
         emitter.instructions << Ir::GetDelayTimerInstruction.new target
       end
@@ -34,52 +79,5 @@ module Chalk
           return Compiler::FunctionType.new(([] of Compiler::Type), Compiler::Type::U8)
       end
     end
-
-    # Function to set the sound timer.
-    class InlineSetSoundFunction < InlineFunction
-      def generate!(emitter, params, table, target, free)
-        emitter.generate! params[0], table, free, free + 1
-        emitter.instructions << Ir::SetSoundTimerInstruction.new free
-      end
-
-      def type
-          return Compiler::FunctionType.new([Compiler::Type::U8], Compiler::Type::U0)
-      end
-    end
-
-    # Function to draw numbers.
-    class InlineDrawNumberFunction < InlineFunction
-      def generate!(emitter, params, table, target, free)
-        emitter.to_stack
-        # Save variables from R0-R2
-        emitter.store 0x2
-        emitter.load free, 0x3
-        emitter.addi free
-        # Write BCD values to I
-        emitter.generate! params[0], table, free, free + 1
-        emitter.instructions << Ir::BCDInstruction.new free
-        emitter.restore 0x2
-        # Get the coordinates
-        free = 3 if free < 3
-        emitter.generate! params[1], table, free, free + 1
-        emitter.generate! params[2], table, free + 1, free + 2
-        # Draw
-        emitter.instructions << Ir::GetFontInstruction.new 0x0
-        emitter.instructions << Ir::DrawInstruction.new free, free + 1, 5
-        emitter.op(Compiler::TokenType::OpAdd, free, 6)
-        emitter.instructions << Ir::GetFontInstruction.new 0x1
-        emitter.instructions << Ir::DrawInstruction.new free, free + 1, 5
-        emitter.op(Compiler::TokenType::OpAdd, free, 6)
-        emitter.instructions << Ir::GetFontInstruction.new 0x2
-        emitter.instructions << Ir::DrawInstruction.new free, free + 1, 5
-        # Load variables from RO-R2 back
-        emitter.to_stack
-        emitter.restore 0x2
-      end
-
-      def type
-          return Compiler::FunctionType.new([Compiler::Type::U8] * 3, Compiler::Type::U0)
-      end
-    end
   end
 end

src/chalk/ir.cr

@@ -12,33 +12,6 @@ module Chalk
       end
     end
 
-    # Instruction to clear the screen
-    class ClearInstruction < Instruction
-      def to_s(io)
-        io << "clear"
-      end
-
-      def to_bin(table, stack, index)
-        return 0x00e0
-      end
-    end
-
-    # Instruction to assign a random value to a register.
-    class RandomInstruction < Instruction
-      def initialize(@register : Int32, @value : Int32)
-      end
-
-      def to_s(io)
-        io << "rand R"
-        @register.to_s(16, io)
-        io << " " << @value
-      end
-
-      def to_bin(table, stack, index)
-        return 0xc000 | (@register << 8) | (@value)
-      end
-    end
-
     # Instruction to load a value into a register.
     class LoadInstruction < Instruction
       def initialize(@register : Int32, @value : Int32)
@@ -394,34 +367,5 @@ module Chalk
         return 0xf007 | (@into << 8)
       end
     end
-
-    # Instruction to set the sound timer to a value.
-    class SetSoundTimerInstruction < Instruction
-      def initialize(@from : Int32)
-      end
-
-      def to_s(io)
-        io << "set_sound R"
-        @from.to_s(16, io)
-      end
-
-      def to_bin(table, stack, index)
-        return 0xf018 | (@from << 8)
-      end
-    end
-
-    class BCDInstruction < Instruction
-      def initialize(@from : Int32)
-      end
-
-      def to_s(io)
-        io << "bcd R"
-        @from.to_s(16, io)
-      end
-
-      def to_bin(table, stack, index)
-        return 0xf033 | (@from << 8)
-      end
-    end
   end
 end