Add illustrations about evaluation chains

content/blog/coq_dawn_eval/index.md

@@ -217,6 +217,11 @@ step-by-step to final stack `vs'`"? For one step, we can say:
 eval_step vs e = final vs'
 ```
 
+Here's a picture so you can start visualizing what it looks like. The black line represents
+a single "step".
+
+{{< figure src="coq_eval_empty.png" caption="Visual representation of a single-step evaluation." class="small" alt="Two dots connected by a line. One dot is labeled \"vs\", and the other \"vs1\"." >}}
+
 For two steps, we'd have to assert the existence of an intermediate
 expression (the "rest of the program" after the first step):
 
@@ -226,6 +231,10 @@ exists ei vsi,
     eval_step vsi ei = final vs' (* Second step to final state. *)
 ```
 
+Once again, here's a picture. I've highlighted the intermediate state, `vsi`, in
+a brighter color.
+{{< figure src="coq_eval_one.png" caption="Visual representation of a two-step evaluation." class="small" alt="Three dots connected by lines. The first dot is labeled \"vs\", the next \"vsi\", and the last \"vs1\". The second dot is highlighted." >}}
+
 For three steps:
 
 ```Coq
@@ -235,6 +244,9 @@ exists ei1 ei2 vsi1 vsi2,
     eval_step vsi2 ei2 = final vs' (* Second step to final state. *)
 ```
 
+I can imagine that you're getting the idea, but here's one last picture:
+{{< figure src="coq_eval_two.png" caption="Visual representation of a three-step evaluation." class="small" alt="Four dots connected by lines. The first dot is labeled \"vs\", the next \"vsi1\", the one after \"vsi2\", and the last \"vs1\". The second and third dots are highlighted." >}}
+
 This is awful! Not only is this a lot of writing, but it also makes various
 sequences of steps have a different "shape". This way, we can't make
 proofs about evaluations of an _arbitrary_ number of steps. Not all is lost, though: if we squint
@@ -251,7 +263,11 @@ If you squint at this, it kind of looks like a list! The "empty"
 part of a list is the final step, while the "cons" part is a middle step. The
 analogy holds up for another reason: an "empty" sequence has zero intermediate
 expressions, while each "cons" introduces a single new intermediate
-program. Perhaps we can define a new data type that matches this? Indeed
+program.
+
+{{< figure src="coq_eval_lists.png" caption="Evaluation sequences as lists." class="large" alt="The three previous figures are drawn together, each next to its list representation." >}}
+
+Perhaps we can define a new data type that matches this? Indeed
 we can!
 
 {{< codelines "Coq" "dawn/DawnEval.v" 64 67 >}}
@@ -283,6 +299,8 @@ and the result will start in `vs` and finish in `vs''`.
 
 {{< codelines "Coq" "dawn/DawnEval.v" 69 75 >}}
 
+{{< figure src="coq_eval_chain_merge.png" caption="Merging evaluation chains." class="large" alt="Two evaluation chains, one starting in \"vs\" and ending in \"vs'\", and one starting in \"vs'\" and ending in \"vs''\", are combined into one. The new chain starts in \"vs\", ends in \"vs''\", and has \"vs'\" in the middle. " >}}
+
 The proof is very short. We go
 {{< sidenote "right" "concat-note" "by induction on the left evaluation chain" >}}
 It's not a coincidence that defining something like <code>(++)</code>
@@ -303,19 +321,20 @@ in the left chain determines how `eval_step (e_comp e1 e2)` behaves. Whether
 {{< sidenote "left" "cons-note" "create a new \"cons\" node." >}}
 This is <em>unlike</em> list concatenation, since we typically don't
 create new nodes when appending to an empty list.
-{{< /sidenote >}} via `chain_middle`. Then, the two cases are as follows:
+{{< /sidenote >}} via `chain_middle`. Then, the two cases are as follows.
 
-* If the step was `final`, then
+If the step was `final`, then
 the rest of the steps use only `e2`, and good news, we already have a chain
 for that!
-* Otherwise, the step was `middle`, an we still have a chain for some
+{{< figure src="coq_eval_chain_base.png" caption="Merging evaluation chains when the first chain only has one step." class="large" alt="A single-step chain connected to another by a line labeled \"chain_middle\"." >}}
+
+Otherwise, the step was `middle`, an we still have a chain for some
 intermediate program `ei` that starts in some stack `vsi` and ends in `vs'`.
 By induction, we know that _this_ chain can be concatenated with the one
 for `e2`, resulting in a chain for `e_comp ei e2`. All that remains is to
 attach to this sub-chain the one step from `(vs, e1)` to `(vsi, ei)`, which
 is handled by `chain_middle`.
-
+{{< figure src="coq_eval_chain_inductive.png" caption="Merging evaluation chains when the first chain has a middle step and others." class="large" alt="Visualization of the inductive case of merging chains." >}}
-  {{< todo >}}A drawing would be nice here!{{< /todo >}}
 
 The `merge` operation is reversible; chains can be split into two pieces,
 one for each composed expression: