code/dyno-alloy/DynoAlloy.als

@@ -59,7 +59,7 @@ pred addBitfieldFlagNeg[b1: Bitfield, b2: Bitfield, flag: Flag] {
 
 enum Property { PMethod, PField, PPublic }
 
-sig Symbol {
+sig Props {
     properties: set Property
 }
 
@@ -69,46 +69,11 @@ pred flagMatchesPropery[flag: Flag, property: Property] {
     (flag = Public and property = PPublic)
 }
 
-pred bitfieldMatchesProperties[bitfield: Bitfield, symbol: Symbol] {
+pred bitfieldMatchesProperties[bitfield: Bitfield, props: Props] {
-    all flag: bitfield.positiveFlags | some property: symbol.properties | flagMatchesPropery[flag, property]
+    // All positive flags must be satisifed
-    all flag: bitfield.negativeFlags | no property: symbol.properties | flagMatchesPropery[flag, property]
+    all flag: bitfield.positiveFlags | some property: props.properties | flagMatchesPropery[flag, property]
-}
+    // All negative flags must not be satisfied
-
+    all flag: bitfield.negativeFlags | no property: props.properties | flagMatchesPropery[flag, property]
-bitfieldExists: run {
-    some Bitfield
-}
-
-matchingBitfieldExists: run {
-    some bitfield : Bitfield, symbol : Symbol | bitfieldMatchesProperties[bitfield, symbol]
-}
-
-matchingBitfieldExists2: run {
-    some bitfield : Bitfield, symbol : Symbol {
-        #bitfield.positiveFlags = 1
-        #bitfield.negativeFlags = 1
-        #symbol.properties = 2
-        bitfieldMatchesProperties[bitfield, symbol]
-    }
-}
-
-fact "method and field are incompatible" {
-    always no symbol: Symbol | {
-        PMethod in symbol.properties and PField in symbol.properties
-    }
-}
-
-fact "public and field are incompatible" {
-    always no symbol: Symbol | {
-        PPublic in symbol.properties and PField in symbol.properties
-    }
-}
-
-matchingBitfieldExists3: run {
-    some bitfield : Bitfield, symbol : Symbol {
-        #bitfield.positiveFlags = 2
-        #symbol.properties = 2
-        bitfieldMatchesProperties[bitfield, symbol]
-    }
 }
 
 pred configureState[filterState: FilterState] {
@@ -176,7 +141,7 @@ fact step {
 example: run {
     all searchState: SearchState {
         // a way that subsequent results of searching it will miss things.
-        eventually some symbol: Symbol, fs: FilterState, fsBroken: FilterState, exclude: Bitfield {
+        eventually some props: Props, fs: FilterState, fsBroken: FilterState, exclude: Bitfield {
             // Some search (fs) will cause a transition / modification of the search state...
             configureState[fs]
             updateOrSet[searchState.found, fs]
@@ -184,15 +149,15 @@ example: run {
             configureState[fsBroken]
             excludeBitfield[searchState.found', exclude]
 
-            // Will allow for a symbol ...
+            // Will allow for a set of properties...
             // ... that are left out of the original search...
-            not bitfieldMatchesProperties[searchState.found, symbol]
+            not bitfieldMatchesProperties[searchState.found, props]
             // ... and out of the current search
-            not (bitfieldMatchesProperties[fs.include, symbol] and not bitfieldMatchesProperties[searchState.found, symbol])
+            not (bitfieldMatchesProperties[fs.include, props] and not bitfieldMatchesProperties[searchState.found, props])
             // But would be matched by the broken search...
-            bitfieldMatchesProperties[fsBroken.include, symbol]
+            bitfieldMatchesProperties[fsBroken.include, props]
             // ... to not be matched by a search with the new state:
-            not (bitfieldMatchesProperties[fsBroken.include, symbol] and not bitfieldMatchesProperties[exclude, symbol])
+            not (bitfieldMatchesProperties[fsBroken.include, props] and not bitfieldMatchesProperties[exclude, props])
         }
     }
 }

content/blog/dyno_alloy.md

@@ -2,7 +2,6 @@
 title: "Proving My Compiler Code Incorrect With Alloy"
 date: 2023-05-02T22:48:52-07:00
 tags: ["Compilers", "Alloy"]
-expirydate: 2022-04-22T12:19:22-07:00
 draft: true
 ---
 
@@ -11,8 +10,6 @@ Intro section and disclaimer
 {{< /todo >}}
 
 I work as a compiler developer on the [Chapel](https://chapel-lang.org) team.
-
-### The Problem at Hand
 One of the things that a language like Chapel has to do is called _resolution_,
 which is the process of figuring out what each identifier, like `x`, refers to,
 and what its type is. Even the first part of that is pretty complicated, what
@@ -122,8 +119,8 @@ different way of searching `M1`. So far, we've seen three:
 In Dyno, there are even more different ways of searching a single scope, and
 some of them are mixes of others (one might consider, for instance, searching
 for only public methods). To represent the various search configurations,
-the Dyno team came up with using a bitfield of _flags_, each of which indicated
+the Dyno team came up with using a bitset of _flags_, each of which indicated
-a necessary condition for a symbol to be returned. A bitfield with flags set
+a necessary condition for a symbol to be returned. A bitset with flags set
 for two properties (like "public" and "method") requires that both such
 properties be found on each symbol that's returned from a scope. This led to
 C++ code along the lines of:
@@ -157,12 +154,12 @@ In Dyno, we like to avoid additional work when we can. To do so, we track
 which scopes have already been searched, and avoid searching them again.
 Since what comes up from a search depends on the flags, we store the flags
 alongside the scopes we've checked. __If we find that the previously-checked
-bitfield is a subset of the current biset, we just skip the search__.
+bitset is a subset of the current biset, we just skip the search__.
 
 But then, what if it _isn't_ a subset? Another concern here is avoiding
 duplicate results (it's easier to check for duplicate definitions if you
 know a symbol is only returned from a search once). So, another feature of
-Dyno's scope search is an additional bitfield of what to _exclude_, which we
+Dyno's scope search is an additional bitset of what to _exclude_, which we
 set to be the previous search's filter. So if the first search looked for
 symbols matching description \\(A\\), and the second search is supposed to
 look for symbols matching description \\(B\\), __then really we do a search
@@ -170,7 +167,7 @@ for \\(A \\land \\lnot B\\) (that is, \\(A\\) and not \\(B\\))__.
 
 {{< dialog >}}
 {{< message "question" "reader" >}}
-Hold on, why do you need a whole another bitfield? There are already negated
+Hold on, why do you need a whole another bitset? There are already negated
 versions of each flag available. Can't you just add those to the filter?
 {{< /message >}}
 {{< message "answer" "Daniel" >}}
@@ -178,7 +175,7 @@ Good question. The difference is a little bit tricky. If we just negated
 each flag, we'd turn an expression like \(A \land B\) into \(\lnot A \land
 \lnot B\). However, according to De Morgan's laws, the proper negation of
 \(A \land B\) is \(\lnot A \lor \lnot B\) (notice the use of "or" instead
-of "and"). On the other hand, using an "exclude" bitfield negates the whole
+of "and"). On the other hand, using an "exclude" bitset negates the whole
 conjunction, rather than the individual flags, and so gives us the result
 we need.
 {{< /message >}}
@@ -189,7 +186,7 @@ need is to to somehow combine the two filters into one. Taking a cue from
 a previous example, in which "public" was followed by "public methods", we
 can observe that since the second search has additional flags, it's more
 restrictive, and thus guaranteed to not find anything. __So we try to create
-the least restrictive bitfield possible, by taking an intersection of the
+the least restrictive bitset possible, by taking an intersection of the
 flags used.__
 
 Actually, that last point is not quite correct in every possible case
@@ -199,7 +196,7 @@ cases in which it misbehaved. So, noting the potential issue in a comment,
 we moved on to other things.
 
 That is, until I decided that it was time to add another possible flag to
-the bitfield. At that point, sitting and trying to reason about the
+the bitset. At that point, sitting and trying to reason about the
 possible cases, I realized that it would be much nicer to describe this
 mathematically, and have a model checker generate outlandish scenarios for
 me. Having at some point seen [Hillel Wayne's
@@ -226,7 +223,7 @@ field). Note that this is not the same as having two flags, `Method` and
 
 Notice also that the list of flags doesn't include the negative versions.
 Since the negative versions are one-for-one with the positive ones, I
-instead chose to represent bitfields as simply two sets: one set of
+instead chose to represent bitsets as simply two sets: one set of
 "positive" flags, in which the presence of e.g. `Method` indicates that the
 `METHOD` flag was set, and one set of "negative" flags, in which the
 presence of `Method` indicates that `NOT_METHOD` was set. This way, I'm
@@ -235,170 +232,6 @@ automatically. Here's how I wrote that in Alloy.
 
 {{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 6 9 >}}
 
-This definition (a _signature_ in Alloy terms) specifies what a bitfield is
-like, but not any operations on it. My next order of business is to define
-some common functionality on bitfields. Alloy is all about
-[relations](https://en.wikipedia.org/wiki/Relation_(mathematics)) and
-[predicates](https://en.wikipedia.org/wiki/Predicate_(mathematical_logic)),
-so for all of these, I had to effectively write something that _checks_ if
-some condition holds for some arguments. This might seem abstract; as an
-example, here's `bitfieldEmpty`, which checks that a bitfield has no flags
-set.
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 27 29 >}}
-
-The `#` operator in Alloy is used to check the size of a set. So, to check
-if a bitfield is empty, I simply check if there are neither positive nor
-negative flags. Probably the most unusual aspect of this piece of code is
-that equality is written as `=`, as opposed to `==` like in most common
-languages. This is because, like I said, alloy is all about relations and
-predicates, and not at all about imperative manipulation of data. So,
-there's no need to reserve `=` for assignment.
-
-The next step from here is a predicate that accepts two arguments,
-`bitfieldEqual`. As its name suggests, this predicate accepts two
-bitfields, and makes sure they have exactly the same flags set. 
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 31 33 >}}
-
-So far, this has been pretty similar to just writing boolean functions in a
-language like C++. However, the similarity is only superficial. An easy way
-to see that is to try to determine the _intersection_ of two bitfields --
-that's the operation we will be having to model, since the Dyno
-implementation uses `&` to combine filter sets. In a language like C++, you
-might write a function like the following, in which you accept two bitfield
-arguments and return a new bitfield.
-
-```C++
-Bitfield intersection(Bitfield b1, Bitfield b2) { /* ... */ }
-```
-
-However, in Alloy, you can't create a new bitfield, nor return something
-from a `pred` that isn't a boolean. Instead, you describe how the inputs
-will be related to the output. So, to model a binary function, you end up
-with a three-parameter predicate: two inputs, and one output. But how
-_does_ the output of a bitfield intersection connect to the two operands
-being intersected? Well, its two flag sets will be intersections of the
-flag sets of the inputs!
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 35 38 >}}
-
-Next, let's talk about what flags _do_. They are used to include and
-exclude symbols based on certain properties. One property is being a
-method: a `METHOD` flag requires this property, whereas a `NOT_METHOD` flag
-ensures that a symbol does not have it. Another property is being a public
-definition: if a symbol isn't public, it'll be ignored by searches with the
-`PUBLIC` flag set. Just like a bitfield can have multiple flags, a symbol
-can have multiple properties (e.g., a public method). Unlike our bitfields,
-though, we won't be modeling symbols as having both positive and negative
-properties. That is to say, we won't have a "not public" property: the
-absence of the "public" property will be enough to make something private.
-Here's the alloy definition for everything I just said:
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 60 64 >}}
-
-Now, we can specify how flags in a bitfield relates to properties on a
-symbol. We can do so by saying which flags match which properties. The
-`Method` flag, for instance, will be satisfied by the `PMethod` property.
-The `MethodOrField` flag is more lenient, and will be satisfied by either
-`PMethod` or `PField`. Here's a predicate `flagMatchesProperty` that
-encodes all the flag-property combinations:
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 66 70 >}}
-
-A bitfield matching a symbol is a little bit more complicated. Said
-informally, the condition for a bitfield matching a symbol is twofold: 
-
-* Every single positive flag, like `METHOD`, must be satisfied by a
-  property on the symbol.
-* None of the negative flags, like `NOT_METHOD`, must be satisfied by a
-  property on the symbol (that is to say, if `Method` is in the negative
-  flags set, then the symbol must not have `PMethod` property). It is more
-  conveniently to formulate this -- equivalently -- as follows: for each
-  negative flag, there most not be a property that satisfies it.
-
-Each of the above two conditions translate quite literally into Alloy:
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 72 75 >}}
-
-We can read line 73 as "for each flag in a bitfield's positive flags, there
-must be some property in the symbol that matches it". Similarly, line 74
-can be read out loud as "for each flag in the negative flags, no property
-in the symbol must match it".
-
-We've written a fair bit of alloy. If you're anything like me, you might be
-getting a bit twitchy: how do we even check that any of this works? For
-this, we'll need to run our model. We will give Alloy a claim, and ask
-it to find a situation in which that claim holds true. The simplest claim
-is "there exists a bitfield".
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 77 79 >}}
-
-Executing this model yields a pretty interesting bitfield: one in which every single flag is set -- both the positive and negative versions.
-
-{{< figure src="bitfield_exists.png" caption="Alloy's output satisfying \"a bit field exists\"" >}}
-
-That's a little bit ridiculous: this bitfield will never match anything!
-You can't be and not be a method at the same time, for instance. For for a
-more interesting example, let's ask for a bitfield that matches some
-symbol.
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 81 83 >}}
-
-The output here is pretty interesting too. Alloy finds a symbol and a
-bitfield that matches it, but they're both empty. In effect, it said:
-"if you don't specify any filters, any private definition will match". Fair
-enough, of course, but a curious departure from the previous maximalist
-"put in all the flags!" approach.
-
-{{< figure src="matching_bitfield_exists.png" caption="Alloy's output satisfying \"a bit field that matches a symbol exists\"" >}}
-
-Let's try nudge it towards a more interesting case. I'm going to ask for a
-filter with one positive and one negative flag, and a symbol with two
-properties.
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 85 92 >}}
-
-The results are more interesting this time: we get a filter for private
-methods, and a private symbol that was... both a field and a method?
-
-{{< figure src="matching_bitfield_exists_2.png" caption="Alloy's spiced up output satisfying \"a bit field that matches a symbol exists\"" >}}
-
-We never told alloy that a symbol can't be both a field and a method. It
-had no idea what the flags meant, just that they exist.
-To let Alloy know what we do -- that the two properties are incompatible --
-we can use a _fact_. To me, the most natural way of phrasing this is "there
-is never a symbol that has both the method and field properties". Alas,
-Alloy doesn't have a `never` keyword; it only has `always`. So I opt instead
-for an alternative formulation: "there are always zero symbols that are
-both methods and fields". In alloy, the claim looks like this:
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 94 99 >}}
-
-Re-running the example program with this fact, alloy spits out a filter for
-public non-method symbols, and a symbol that's a public field. Public
-fields also aren't a thing in Chapel (all fields in a class are publicly
-readable in the current version of the language). Perhaps it's time for
-another fact.
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 100 104 >}}
-
-But now, Alloy fails to come up with anything at all. That makes sense: by
-restricting the search to a symbol with two properties, and making `PField`
-incompatible with the other two possible properties, we've guaranteed that
-our symbol would be a public method. But then, we also required a negative
-flag in the filter; however, all the flags in the list match a public
-method, so making any of them negative would guarantee that our symbol
-would not be found. Let's change the example up a bit to only ask for
-positive flags.
-
-{{< codelines "Alloy" "dyno-alloy/DynoAlloy.als" 106 112 >}}
-
-This time, alloy gives us a symbol that's a public method, and a filter
-that only looks for public methods. Fair enough.
-
-{{< figure src="matching_bitfield_exists_3.png" caption="Alloy's spiced up output satisfying \"a bit field that matches a symbol exists\"" >}}
-
 {{< todo >}}
 The rest of the article
 {{< /todo >}}

themes/vanilla

@@ -1 +1 @@
-Subproject commit 7e3099aae3f2fac59fdbc94d91eba8d7b214c20e
+Subproject commit d1e25ddf19bd31ed8e372a35568a47c03507efc2