blog-static/03_spa_agda_fixed_height.md at 928adbd59498d980702a3d57b0012877a8a05751

Danila Fedorin 861dafef70 Finish up draft about lattices of finite height.

Signed-off-by: Danila Fedorin <danila.fedorin@gmail.com>

2024-07-05 20:43:26 -07:00

26 KiB

Raw Blame History

title

series

description

date

draft

Formalizing Finite Height

The formalization I settled on is quite similar to the informal description: a lattice has a finite height of length h if the longest chain of elements compared by (<) is exactly h. There's only a slight complication: we allow for equivalent-but-not-equal elements in lattices. For instance, for a map lattice, we don't care about the order of the keys: so long as two maps relate the same set of keys to the same respective values, we will consider them equal. This, however, is beyond the notion of Agda's propositional equality (_≡_). Thus, we we need to generalize the definition of a chain to support equivalences. I parameterize the Chain module in my code by an equivalence relation, as well as the comparison relation R, which we will set to < for our chains. The equivalence relation and R/< are expected to play together nicely (if a < b, and a is equivalent to c, then it should be the case that c < b).

From there, the definition of the Chain data type is much like the definition of a vector, but indexed by the endpoints, and containing witnesses of R/< between its elements. The indexing allows for representing the type of chains between particular lattice elements, and serves to ensure concatenation and other operations don't merge disparate chains.

In the done case, we create a single-element chain, which has no comparisons. In this case, the chain starts and stops at the same element (where "the same" is modulo our equivalence). The step case prepends a new comparison a1 < a2 to an existing chain; once again, we allow for the existing chain to start with a different-but-equivalent element a2'.

With that definition in hand, I define what it means for a type of chains between elements of the lattice A to have a maximum height; simply put, all chains must have length less than or equal to the maximum.

Though Bounded specifies a bound on the length of chains, it doesn't specify the (lowest) bound. Specifically, if the chains can only have length three, they are bounded by both 3, 30, and 300. To claim a lowest bound, we need to show that a chain of that length actually exists (otherwise, we could take the previous natural number, and it would be a bound as well). Thus, I define the Height predicate to require that a chain of the desired height exists, and that this height bounds the length of all other chains.

Finally, for a lattice to have a finite height, the type of chains formed by using its less-than operator needs to have that height (satisfy the Height h predicate). To avoid having to thread through the equivalence relation, congruence proof, and more, I define a specialized predicate for lattices specifically. I do so as a "method" in my IsLattice record.

{{< codelines "agda" "agda-spa/Lattice.agda" 153 180 "hl_lines = 27 28">}}

Thus, bringing the operators and other definitions of IsLattice into scope will also bring in the FixedHeight predicate.

Fixed Height of the "Above-Below" Lattice

We've already seen intuitive evidence that the sign lattice --- which is an instance of the ["above-below" lattice]({{< relref "01_spa_agda_lattices#the-above-below-lattice" >}}) --- has a fixed height. The reason is simple: we extended a set of incomparable elements with a single element that's greater, and a single element that's lower. We can't make chains out of incomparable elements (since we can't compare them using <); thus, we can only have one < from the new least element, and one < from the new greatest element.

The proof is a bit tedious, but not all that complicated. First, a few auxiliary helpers; feel free to read only the type signatures. They specify, respectively:

That the bottom element \bot of the above-below lattice is less than any concrete value from the underlying set. For instance, in the sign lattice case, \bot < +.
That \bot is the only element satisfying the first property; that is, any value strictly less than an element of the underlying set must be \bot.
That the top element \top of the above-below lattice is greater than any concrete value of the underlying set. This is the dual of the first property.
That, much like the bottom element is the only value strictly less than elements of the underlying set, the top element is the only value strictly greater.

{{< codelines "agda" "agda-spa/Lattice/AboveBelow.agda" 315 335 >}}

From there, we can construct an instance of the longest chain. Actually, there's a bit of a hang-up: what if the underlying set is empty? Concretely, what if there were no signs? Then we could only construct a chain with one comparison: \bot < \top. Instead of adding logic to conditionally specify the length, I simply require that the set is populated by requiring a witness

{{< codelines "agda" "agda-spa/Lattice/AboveBelow.agda" 85 85 >}}

I use this witness to construct the two-< chain.

{{< codelines "agda" "agda-spa/Lattice/AboveBelow.agda" 339 340 >}}

The proof that the length of two --- in terms of comparisons --- is the bound of all chains of AboveBelow elements requires systematically rejecting all longer chains. Informally, suppose you have a chain of three or more comparisons.

If it starts with \top, you can't add any more elements since that's the greatest element (contradiction).
If you start with an element of the underlying set, you could add another element, but it has to be the top element; after that, you can't add any more (contradiction).
If you start with \bot, you could arrive at a chain of two comparisons, but you can't go beyond that (in three cases, each leading to contradictions).

{{< codelines "agda" "agda-spa/Lattice/AboveBelow.agda" 342 355 "hl_lines=8-14">}}

Thus, the above-below lattice has a length of two comparisons (or alternatively, three elements).

{{< codelines "agda" "agda-spa/Lattice/AboveBelow.agda" 357 358 >}}

And that's it.

Fixed Height of the Product Lattice

Now, for something less tedious. We saw above that for a product lattice to have a finite height, its constituent lattices must have a finite height. The proof was by contradiction (by constructing an infinitely long product chain given a single infinite lattice). As a result, we'll focus this section on products of two finite lattices A and B. Additionally, for the proofs in this section, I require element equivalence to be decidable.

Let's think about how we might go about constructing the longest chain in a product lattice. Let's start with some arbitrary element p_1 = (a_1, b_1). We need to find another value that isn't equal to p_1, because we'rebuilding chains of the less-than operator (<), and not the less-than-or-equal operator (\leq). As a result, we need to change either the first component, the second component, or both. If we're building "to the right" (adding bigger elements), the new components would need to be bigger. Suppose then that we came up with a_2 and b_2, with a_1 < a_2 and b_1 < b_2. We could then create a length-one chain:

{{< latex >}} (a_1, b_1) < (a_2, b_2) {{< /latex >}}

That works, but we can construct an even longer chain by increasing only one element at a time:

{{< latex >}} (a_1, b_1) < (a_1, b_2) < (a_2, b_2) {{< /latex >}}

We can apply this logic every time; the conclusion is that when building up a chain, we need to increase one element at a time. Then, how many times can we increase an element? Well, if lattice A has a height of two (comparisons), then we can take its lowest element, and increase it twice. Similarly, if lattice B has a height of three, starting at its lowest element, we can increase it three times. In all, when building a chain of A × B, we can increase an element five times.

This gives us a recipe for constructing the longest chain in the product lattice: take the longest chains of A and B, and start with the product of their lowest elements. Then, increase the elements one at a time according to the chains. The simplest way to do that might be to increase by all elements of the A chain, and then by all of the elements of the B chain (or the other way around). That's the strategy I took when constructing the (\text{Sign} \times \text{Sign}) chain above.

To formalize this notion, a few lemmas. First, given two chains where one starts with the same element another ends with, we can combine them into one long chain.

More interestingly, given a chain of comparisons in one lattice, we are able to lift it into a chain in another lattice by applying a function to each element. This function must be monotonic, because it must not be able to reverse a < b such that f(b) < f(a). Moreover, this function should be injective, because if f(a) = f(b), then a chain a < b might be collapsed into f(a) \not< f(a), changing its length. Finally, the function needs to produce equivalent outputs when giving equivalent inputs. The result is the following lemma:

Given this, and two lattices of finite height, we construct the full product chain by lifting the A chain into the product via a \mapsto (a, \bot), lifting the B chain into the product via b \mapsto (\top, b), and concatenating the results. This works because the first chain ends with (\top, \bot), and the second starts with it.

This gets us the longest chain; what remains is to prove that this chain's length is the bound of all other changes. To do so, we need to work in the opposite direction; given a chain in the product lattice, we need to somehow reduce it to chains in lattices A and B, and leverage their finite height to complete the proof.

The key idea is that for every two consecutive elements in the product lattice chain, we know that at least one of their components must've increased. This increase had to come either from elements in lattice A or in lattice B. We can thus stick this increase into an A-chain or a B-chain, increasing its length. Since one of the chains grows with every consecutive pair, the number of consecutive pairs can't exceed the length of the A and B chains.

I implement this idea as an unzip function, which takes a product chain and produces two chains made from its increases. By the logic we've described, the length two chains has to bound the main one's. I give the signature below, and will put the implementation in a collapsible detail block. One last detail is that the need to decide which chain to grow --- and thus which element has increased --- is what introduces the need for decidable equality.

{{< codelines "agda" "agda-spa/Lattice/Prod.agda" 158 172 "" "(Click here for the implementation of unzip)" >}}

Having decomposed the product chain into constituent chains, we simply combine the facts that they have to be bounded by the height of the A and B lattices, as well as the fact that they bound the combined chain.

{{< codelines "agda" "agda-spa/Lattice/Prod.agda" 174 183 "hl_lines = 8-9" >}}

This completes the proof!

Iterated Products

The product lattice allows us to combine finite height lattices into a new finite height lattice. From there, we can use this newly lattice as a component of yet another product lattice. For instance, if we had L_1 \times L_2, we can take a product of that with L_1 again, and get L_1 \times (L_1 \times L_2). Since this also creates a finite-height lattice, we can repeat this process, and keep taking a product with L_1, creating:

{{< latex >}} \overbrace{L_1 \times ... \times L_1}^{n\ \text{times}} \times L_2. {{< /latex >}}

I call this the iterated product lattice. Its significance will become clear shortly; in the meantime, let's prove that it is indeed a lattice (of finite height). To create an iterated product lattice, we still need two constituent lattices as input.

At a high level, the proof goes by induction on the number of applications of the product. There's just one trick. I'd like to build up an isLattice instance even if A and B are not finite-height. That's because in that case, the iterated product is still a lattice, just not one with a finite height. On the other hand, the isFiniteHeightLattice proof requires the isLattice proof. Since we're building up by induction, that means that every recursive invocation of the function, we need to get the "partial" lattice instance and give it to the "partial" finite height lattice instance. When I implemented the inductive proof for isLattice independently from the (more specific) inductive proof of isFiniteHeightLattice, Agda could not unify the two isLattice instances (the "actual" one and the one that serves as witness for isFiniteHeightLattice). This led to some trouble and inconvenience, and so, I thought it best to build the two up together.

To build up with the lattice instance and --- if possible --- the finite height instance, I needed to allow for the constituent lattices either finite or infinite. I supported this by defining a helper type:

Then, I defined the "everything at once" type, in which, instead of a field for the proof of finite height, has a field that constructs this proof if the necessary additional information is present.

Finally, the proof by induction. It's actually relatively long, so I'll include it as a collapsible block.

{{< codelines "agda" "agda-spa/Lattice/IterProd.agda" 57 95 "" "(Click here to expand the inductive proof)" >}}

Fixed Height of the Map Lattice

We saw above that we can make a map lattice have a finite height if we fix its keys. How does this work? Well, if the keys are always the same, we can think of such a map as just a tuple, with as many element as there are keys.

{{< latex >}} \begin{array}{cccccc} { & a: 1, & b: 2, & c: 3, & } \ & & \iff & & \ ( & 1, & 2, & 3 & ) \end{array} {{< /latex >}}

This is why I introduced the iterated product earlier; we can use them to construct the second lattice in the example above. I'll take one departure from that example, though: I'll "pad" the tuples with an additional unit element at the end. The unit type (denoted (\top)) --- which has only a single element --- forms a finite height lattice trivially; I prove this in an appendix below. Using this padding helps reduce the number of special cases; without the adding, the tuple definition might be something like the following:

{{< latex >}} \text{tup}(A, k) = \begin{cases} \top & k = 0 \ A & k = 1 \ A \times \text{tup}(A, k - 1) & k > 1 \end{cases} {{< /latex >}}

On the other hand, if we were to allow the extra padding, we could drop the definition down to:

{{< latex >}} \text{tup}(A, k) = \text{iterate}(t \mapsto A \times t, k, \bot) = \begin{cases} \top & k = 0 \ A \times \text{tup}(A, k - 1) & k > 0 \end{cases} {{< /latex >}}

And so, we drop from two to three cases, which means less proof work for us. The tough part is to prove that the two representations of maps --- the key-value list and the iterated product --- are equivalent. We will not have much trouble proving that they're both lattices (we did that last time, for both [products]({{< relref "02_spa_agda_combining_lattices#the-cartesian-product-lattice" >}}) and [maps]({{< relref "02_spa_agda_combining_lattices#the-map-lattice" >}})). Instead, what we need to do is prove that the height of one lattice is the same as the height of the other. We prove this by providing something like an isomorphism: a pair of functions that convert between the two representations, and preserve the properties and relationships (such as ((\sqcup))) of lattice elements. In fact, list of the conversion functions' properties is quite extensive:

{{< codelines "agda" "agda-spa/Isomorphism.agda" 22 33 "hl_lines=8-12">}}

First, the functions must preserve our definition of equivalence. Thus, if we convert two equivalent elements from the list representation to the tuple representation, the resulting tuples should be equivalent as well. The reverse must be true, too.
Second, the functions must preserve the binary operations --- see also the definition of a homomorphism. Specifically, if f is a conversion function, then the following should hold:

{{< latex >}} f(a \sqcup b) \approx f(a) \sqcup f(b) {{< /latex >}}

For the purposes of proving that equivalent maps have finite heights, it turns out that this property need only hold for the join operator (\sqcup).
Finally, the functions must be inverses of each other. If you convert list to a tuple, and then the tuple back into a list, the resulting value should be equivalent to what we started with. In fact, they need to be both "left" and "right" inverses, so that both (f(g(x))\approx x) and g(f(x)) \approx x.

Given this, the high-level proof is in two parts:

Proving that a chain of the same height exists in the second (e.g., tuple) lattice: To do this, we want to take the longest chain in the first (e.g. key-value list) lattice, and convert it into a chain in the second. The mechanism for this is not too hard to imagine: we just take the original chain, and apply the conversion function to each element.

Intuitively, this works because of the structure-preserving properties we required above. For instance (recall the definition of (\leq) explained by Lars Huple, which in brief is (a \leq b \triangleq a \sqcup b = b)):

{{< latex >}} \begin{align*} a \leq b & \iff (\text{definition of less than})\ a \sqcup b \approx b & \iff (\text{conversions preserve equivalence}) \ f(a \sqcup b) \approx f(b) & \iff (\text{conversions distribute over binary operations}) \ f(a) \sqcup f(b) \approx f(b) & \iff (\text{definition of less than}) \ f(a) \leq f(b) \end{align*} {{< /latex >}}
Proving that longer chains can't exist in the second (e.g., tuple) lattice: we've already seen the mechanism to port a chain from one lattice to another lattice, and we can use this same mechanism (but switching directions) to go in reverse. If we do that, we can take a chain of questionable length in the tuple lattice, port it back to the key-value map, and use the (already known) fact that its chains are bounded to conclude the same thing about the tuple chain.

As you can tell, the chain porting mechanism is doing the heavy lifting here. It's relatively easy to implement given the conditions we've set on conversion functions, in both directions:

With that, we can prove the second lattice's finite height:

The conversion functions are also not too difficult to define. I give them below, but I refrain from showing proofs of the more involved properties (such as the fact that from and to are inverses, preserve equivalence, and distribute over join) here. You can view them by clicking the link at the top of the code block below.

{{< codelines "agda" "agda-spa/Lattice/FiniteValueMap.agda" 67 84 >}}

Above, FiniteValueMap ks is the type of maps whose keys are fixed to ks; defined as follows:

Proving the remaining properties (which as I mentioned, I omit from the main body of the post) is sufficient to apply the isomorphism, proving that maps with finite keys are of a finite height.

Using the Finite Height Property

Lattices having a finite height is a crucial property for the sorts of static program analyses I've been working to implement. We can create functions that traverse "up" through the lattice, creating larger values each time. If these lattices are of a finite height, then the static analyses functions can only traverse "so high". Under certain conditions, this guarantees that our static analysis will eventually terminate with a fixed point. Pragmatically, this is a state in which running our analysis does not yield any more information.

The way that the fixed point is found is called the fixed point algorithm. We'll talk more about this in the next post.

Appendix: The Unit Lattice

The unit lattice is a relatively boring one. I use the built-in unit type in Agda, which (perhaps a bit confusingly) is represented using the symbol ⊤. It only has a single constructor, tt.

The equivalence for the unit type is just propositional equality (we have no need to identify unequal values of ⊤, since there is only one value).

Both the join (\sqcup) and meet (\sqcap) operations are trivially defined; in both cases, they simply take two tts and produce a new tt. Mathematically, one might write this as (\text{tt}, \text{tt}) \mapsto \text{tt}. In Agda:

These operations are trivially associative, commutative, and idempotent.

That's sufficient for them to be semilattices:

The [absorption laws]({{< relref "01_spa_agda_lattices#absorption-laws" >}}) are also trivially satisfied, which means that the unit type forms a lattice.

Since there's only one element, it's not really possible to have chains that contain any more than one value. As a result, the height (in comparisons) of the unit lattice is zero.

26 KiB Raw Blame History Unescape Escape