VerilogCPU/cpu.sv

module cpu 	(input logic clk, reset,
			 input logic prog,
			 input logic [15:0] inputs,
			 input logic[31:0] pinst,
			 input logic[7:0] paddr,
			 output logic [31:0] disp);
	logic [7:0] pc;
	logic [7:0] pc_next, pc_compute;
	logic [31:0] inst;
	logic [5:0] op;
	logic [2:0] rd, rs, rt;
	logic [31:0] rd_val, rs_val, rt_val;
	logic [15:0] const_val;
	logic [31:0] const_extend;
	logic [31:0] cpu_disp;
	logic [31:0] reg_alu_out, const_alu_out, val_out;
	logic should_jump, should_write, use_const;
	
	assign op = inst[31:26];
	assign rd = inst[25:23];
	assign rs = inst[22:20];
	assign rt = inst[19:17];
	assign const_val = inst[15:0];
	
	assign should_write = inst[31];
	assign use_const = inst[30];
	assign should_jump = inst[29];
	
	assign const_extend = const_val;
	
	registers #(32) regs(
		.raddr1(rs),
		.raddr2(rt),
		.waddr(rd),
		.in(rd_val),
		.wen(should_write),
		.clk(clk),
		.reset(reset),
		.out1(rs_val),
		.out2(rt_val));
	
	memory #(32) insts(
		.raddr(pc),
		.waddr(paddr),
		.wen(prog),
		.in(pinst),
		.clk(clk),
		.out(inst),
		.reset(reset));
		
	alu #(32) reg_alu(
		.left(rs_val),
		.right(rt_val),
		.op(inst[28:26]),
		.out(reg_alu_out));
		
	alu #(32) const_alu(
		.left(rs_val),
		.right(const_extend),
		.op(inst[28:26]),
		.out(const_alu_out));
		
	mux2 #(32) out_mux(
		.left(reg_alu_out),
		.right(const_alu_out),
		.select(use_const),
		.out(val_out));
		
	mux2 #(32) rd_mux(
		.left(val_out),
		.right({16'b0, inputs}),
		.select(~inst[28] & inst[27] & inst[26]),
		.out(rd_val));
		
	assign pc_compute = rt_val + const_val;

	mux2 #(8) pc_mux(
		.left(pc + 8'b01),
		.right(pc_compute),
		.select(should_jump & (inst[28] | (inst[26] ^ (rs_val == 0)))),
		.out(pc_next));
	
	always_ff@(posedge clk) 
		if(reset) begin
			pc <= 0;
			cpu_disp <= 0;
		end else if(!prog) begin
			case(op)
				6'b0000000: cpu_disp <= rs_val;
			endcase
			pc <= pc_next;
		end
	
	assign disp = cpu_disp;
	
endmodule